Thermo-EXTENSION milled

/milling for a given profile/

Made of hard polyurethane foam with closed chambers. Through a special shape by milling the profile in combination with a dedicated PU gasket, it enables the execution of a correct tight and warm connection of window joinery. Additionally reinforced with walls made of 6 mm thick MGO board. Novelty!!! double-sided cladding made of composite board,

A modern solution in the construction industry for the correct installation of joinery,
maximum length 6.00m, the only such product on the market!
stable construction and resistant to changing pressure,
made of closed-cell polyurethane foam,
double-sided cladding made of MGO magnesium boards,
NOVELTY! double-sided cladding made of composite panels,
With composite panel cladding, there is no need to use EPDM!
excellent thermal insulation coefficient,
high compressive strength 1500kg/m,
dedicated PU gasket

Thermo-EXTENSION milled	Height (H)	Width (S)	Length (L)
STANDARD	from 30mm to 500mm	60mm; 70mm; 80mm	up to 6,00m
UNDER INDIVIDUAL ORDER	from 30mm to 500mm	On request after sending the specification	up to 6,00m

Milled thermo-EXTENSION available in the standard version with dimensions as in the table above

Thermo-EXTENSION milled to individual order – after agreeing with the technologists of the sent specification (height and length as in the standard, the width of the extension can be agreed).